|
|
|
|
|
|
| Tools → Polishing |
| Tumble Vibe 10 |
|
Description : |
|
Industrial model TV-10 has heavy duty drive and suspension combined with tough, cross-linked polyethylene bowl. Machine comes equipped for use with compound rinsing system 47.706. Capacity of bowl is .10 cu. ft (.0013 cu. m) |
| Item # | Description: | Price: | |
| 47.701 | TV-5 115V/60Hz | $99.95 |
| Fabulustre |
|
Description : |
|
Provides a high-luster finish on all types of precious and decorative metals. Special formulation removes light scratches and produces a test, mirror-bright, final finish without discoloration. Greaseless, dry but not dusty, which means fast and easy cleanup with little or no residue. |
| Item # | Description: | Price: | |
| 47.312 | 1/4 lb Tube | $3.25 | |
| 47.313 | 1 lb Tube | $5.65 |
| Zam Buffing Compound |
|
Description : |
|
Formulated especially for silver and turquoise jewelry. Will not scratch soft stones such as turquoise. Time-saving to use, since stones do not have to be removed before buffing a new piece. Leaves a high luster without residue. Fast clean-up does not cling to or penetrate surface of stones. Versatile, many goldsmith prefer ZAM to rouge as a final touch. |
| Item # | Description: | Price: | |
| 47.502 | 1/4 lb Tube | $3.25 | |
| 47.503 | 1 lb Tube | $6.40 |
| Rubber Finger Cots |
|
Description : |
|
Made of soft, molded rubber to provide comfortable protection from oil, dirt and grime. Sold by the dozen. |
| Item # | Description: | Price: | |
| 23.225 | Small | $5.00 | |
| 23.226 | Medium | $5.00 | |
| 23.227 | Large | $5.00 | |
| 23.228 | Extra Large | $5.00 |
| Safety Tape |
|
Description : |
|
Lightweight but strong. Will protect your skin from cuts and burns. Open mesh allows skin to breath. Just wrap around twice for full protection. 3/4 x 90 ft. 16 in a pack. Sold by the pack. |
| Item # | Description: | Price: | |
| 47.532 | Safety Tape | $27.50 |
| Bench Polisher |
|
Description : |
|
A powerful, variable-speed bench motor in a compact size. Has a 1/8 HP, 110V motor, a clear dust shield and measures 14" W x 6 1/4" D x 6" H (356 x 159 x 152mm). The solid-state dial speed control has a range of 1,800-14,000 RPM. The 1/4" (6mm) left and right tapered spindles can accommodate buffs and brushes up to 3" (76mm) in diameter. A flexible shaft kit, used to power burs, drills and miniature brushes can also be used with this polishing motor. The attachment kit includes an inner shaft, outer sheath and jewelers style hand piece and attaches easily to the right side of the motor. Shipping weight 7 lbs. |
| Item # | Description: | Price: | |
| 47.110 | 110 volt unit | $199.00 |
| Deluxe Dust Collector |
|
Description : |
|
Quality Features:
|
| Item # | Description: | Price: | |
| 191.100 | Polishing Cabinet | $339.00 | |
| 191.00 | Polishing Cabinet | $239.00 | |
| 191.100X | Industrial 1/2 HP Motor Only | $145.00 |
| Small Tumblers |
|
Description : |
| Our most popular single-barrel tumbler is the perfect size for getting started. Holds up to 3 lbs of rock or jewelry items. Shipping weight: 5lbs |
| Item # | Description: | Price: | ||
| A | 3A | Tumbler Polish Kit for Rotary Tumblers (4 part) | $80.00 | |
| B | 33B | Lortone Tumbler - Rotary 110v | $104.00 | |
| C | 45C | Lortone Tumbler - Rotary 110v | $104.00 | |
| D | 3-1.5B | Lortone Tumbler - rotary - 110v | $110.00 |
| Dust Collector |
|
Description : |
|
The 60U dust collector is designed to provide
suction to two 3" (7.6cm) work positions, simultaneously. Powered by
a ball bearing, capacitor start, industrially rated suction motor, the 60U
contains a suction capacity of 400CFM (cubic feet/minute) [189m3/min] or
200 CFM [94m3/min] through each of two 3" [7.6cm] suction inlets provided. Dust and grindings are cleaned from the air intakes by 14 shakable cloth filter bags which effectively entrap 0.5 micron particles and larger. Manufactured to fit under existing work benches or new insulations, its compact size delivers central system suction power. Finished in a durable, baked coating. |
| Item # | Description: | Price: | |
| 60U | Dust Collector | $750.00 |
| Dust Collector |
|
Description : |
|
A 1 HP suction unit designed to provide
suction for up to four 3" [7.6cm] work positions, simultaneously, The 101
is powered by a 1 HP ball bearing capacitor start, industrially rated
motor. This unit contains (68 square feet [6.3m2] of cloth filter
area. 24 shakeable filter bags effectively entrap 0.5 micron
particles and larger in the 800 CFM (cubic feet/minute) [378m3/min.] air
flow. The 101 is provided with four 3" Volts/60Hz. Units also
available in 230 Volts/60Hz single phase and 220/440 Volts three phase. Please specify voltage when
ordering. The 101 is shipped complete with a switch and box type silencer. Finished in a durable, baked finish. A stack silencer is available at an additional cost. |
| Item # | Description: | Price: | |
| 101 | Dust Collector | $1,880.00 |
| Special Polishing Unit |
|
Description : |
| The 60C-1 Special is designed for the laboratory which is performing everyday polishing. Its larger table top, 42" wide x 24" deep [107cm x 61cm], with larger polishing hoods allows technicians to polish from a seated or standing position. Two 12" x 32" x 2" [30cm 81cm x 5cm] (1536 cubic inches) [25.2m3] fiberglass filters provide excellent filtration for the 500 CFM (cubic feet/minute] suction capacity. Finished in a durable, modern baked coating. |
| Item # | Description: | Price: | |
| 60C-1 | Special Polishing Unit | $1,995.00 |
| Polishing Unit |
|
Description : |
|
Suction Motor 1/4 HP - 115 volts - 60Hz Polishing Motor 1/4 H.P. - 115 Volts - 80 Hz 2 Speed - 3450/1725 RPM - #26 Red Wing. Left and Right 1/2" Spindles Supplied. Unit available with 230 Volts and 50Hz at Additional Cost. |
| Item # | Description: | Price: | |
| 60C | Polishing Unit | $1,995.00 |
| Red Wing Lathe |
|
Description : |
| A full 1/4 HP, 1725/3450 rpm two speed polishing lathe with 6" [15.2cm] shaft height (115 Volts/60Hz). Designed and built for use as a polishing lathe, its tapered shafts will accept standard dental tapered chucks. The 6" [15.2cm] shaft height of the 25 will allow the technician to utilize larger diameter buffing wheels for purnice and dry polishing operations |
| Item # | Description: | Price: | |
| 26 | Red Wing Lathe | $167.40 |
| Polishing Hood |
|
Description : |
| Made of heavy gauge sheet steel, finished in a textured baked beige enamel. Dimensions - 11" w x 16" H x 15 1/4" D. 3" Suction inlet in Bottom Rear Equipped with Two Light Sockets and Cord. Shipping Weight 9lbs |
| Item # | Description: | Price: | |
| 86J-1 | Polishing Hood | $91.00 |
| Master Magnetic Shiner |
|
Description : |
| Working like thousands of hands on a single job. Bright finish in under an hour. No gold lost during cleaning and finishing. Shine, but no damage to the tiniest details. Start cleaning after casting, soldering, or repairing jewelry. Features: 11 inch bowl, timer with automatic shut off, deluxe speed control, power switch, indicator light, forward-reverse control. Optional auto-forward/reverse controller available. Dimension: 19Hx18Wx18D 82 lbs. 120 volts single phase, 220 volts available. |
| Item # | Description: | Price: | |
| JEM-415-110 | Master Magnetic Shiner | $2465.00 |
| Super Magnetic Shiner |
|
Description : |
| Working like thousands of hands on a single job. Bright finish in under an hour. No gold lost during cleaning and finishing. Shine, but no damage to the tiniest details. Start cleaning after casting, soldering or repairing jewelry. Features: 8 inch bowl, timer with automatic shut off, deluxe speed control, power switch, indicator light, forward-reverse control. Dimension: 22H x 15W x 15D 65 lbs. 120 volts single phase. 220 volts available. |
| Item # | Description: | Price: | |
| JEM-425-110 | Super Magnetic Shiner | $1650.00 |
| Mini Magnetic Shiner |
|
Description : |
| Working like thousands of hands on a single job. Bright finish in under an hour. No gold lost during cleaning and finishing. Shine, but no damage to the tiniest details. Start cleaning after casting, soldering, or repairing jewelry. Features: 6 in bowl, timer with automatic shut off, deluxe speed control, power switch, indicator light. 120 volts single phase. 220 volts available upon request. |
| Item # | Description: | Price: | |
| JEM-435-110 | Mini Magnetic Shiner | $850.00 |
| Stainless Steel Pins for Magnetic Tumbler |
Description : |
| Stainless Steel Pins for Magnetic Tumbler. |
| Item # | Description: | Price: | |
| JEM-MTP355 | Stainless Steel Pins for Magnetic Tumbler | $29.95 |
| Rubber Finger Cots |
Description : |
| Made of soft, molded rubber to provide comfortable protection from oil, dirt and grime. Sold by the dozen. |
| Item # | Description: | Price: | |
| 23.225 | Small | $5.00 | |
| 23.226 | Medium | $5.00 | |
| 23.227 | Large | $5.00 | |
| 23.228 | Extra Large | $5.00 |
| Safety Tape |
Description : |
| Lightweight but strong. Will protect your skin from cuts and burns. Open mesh allows skin to breath. Just wrap around twice for full protection 3/4 x 90 ft 16 in a pack. Sold by the pack. |
| Item # | Description: | Price: | |
| 23.225 | Small | $5.00 | |
| 23.226 | Medium | $5.00 | |
| 23.227 | Large | $5.00 | |
| 23.228 | Extra Large | $5.00 |
| Safety Tape |
Description : |
| Lightweight but strong. Will protect your skin from cuts and burns. Open mesh allows skin to breath. Just wrap around twice for full protection 3/4 x 90 ft 16 in a pack. Sold by the pack. |
| Item # | Description: | Price: | |
| 47.532 | Small | $27.50 |
Page 3 of 3
[<<Previous>>] [<<Next>>]
HOME | SITE MAP | BEADING SUPPLY | BOXES & BAGS | CARRYING CASES | DISPLAYS | ELECTRONICS |
JEWELRY CLEANING | MAGNIFIERS |SPECIALS |TOOLS | FAQs | CONTACT US | UPDATES | PRODUCT SEARCH | SHOW SCHEDULE
Copyright © 2005 Jemco Jewelry Supplies Inc. All rights reserved. |